1. Release Notes
    1. Release Notes - 2.0.2Latest
    1. Release Notes - 2.0.1
    1. Release Notes - 2.0.0
  1. Introduction
    1. Introduction
    1. Features
    1. Architecture
    1. Advantages
    1. Glossary
  1. Installation
    1. Intruction
      1. Intro
      2. Port Requirements
    1. Install on Linux
      1. All-in-One Installation
      2. Multi-Node Installation
      3. Installing HA Master and Etcd Cluster
      4. Storage Configuration Instruction
    1. Install on Kubernetes
      1. Prerequisites
      2. Online Installation
      3. Offline Installation
    1. Related Tools
      1. Integrating Harbor Registry
    1. Cluster Operation
      1. Adding New Nodes
      2. High Risk Operation
      3. Uninstalling KubeSphere
  1. Quick Start
    1. Getting Started with Multitenancy
    1. Exposing your APP using Ingress
    1. Deploying a MySQL Application
    1. Deploying a Wordpress Website
    1. Job to compute π to 2000 places
    1. Deploying Grafana using APP Template
    1. Creating Horizontal Pod Autoscaler
    1. S2i: Publish your app without Dockerfile
    1. Canary Release of Microservice APP
    1. CI/CD based on Spring Boot Project
    1. Building a Pipeline in a Graphical Panel
    1. CI/CD based on GitLab and Harbor
    1. Ingress-Nginx for Grayscale Release
  1. Cluster Admin Guide
    1. Multi-tenant Management
      1. Overview of Multi-tenant Management
      2. Overview of Role Management
    1. Platform Management
      1. Account Management
      2. Platform Roles Management
    1. Infrastructure
      1. Service Components
      2. Nodes
      3. Storage Classes
    1. Monitoring Center
      1. Physical Resources
      2. Application Resources
    1. Application Repository
    1. Jenkins System Settings
  1. User Guide
    1. Application Template
    1. Workloads
      1. Deployments
      2. StatefulSets
      3. DaemonSets
      4. Jobs
      5. CronJobs
    1. Storage
      1. Volumes
    1. Network & Services
      1. Services
      2. Routes
    1. Configuration Center
      1. Secret
      2. ConfigMap
      3. Image Registry
    1. Project Settings
      1. Basic Information
      2. Member Roles
      3. Project Members
      4. Internet Access
    1. DevOps Project
      1. DevOps Project Management
      2. DevOps Project Management
      3. DevOps Project Management
      4. DevOps Project Management
      5. DevOps Project Management
  1. Development Guide
    1. Preparing the Development Environment
    1. Development Workflow
  1. API Documentation
    1. API Guide
    1. How to invoke KubeSphere API
KubeSphere®️ 2020 All Rights Reserved.


A Job creates one or more Pods and ensures that a specified number of them successfully terminate. As pods successfully complete, the Job tracks the successful completions.

This document just demonstrates the definition of all the parameters or fields in the creation steps. At the same time, Quick Start - Create a simple job use an example to help you quickly compute π to 2000 places and prints it out with simple command to illustrate the basic feature of Job.

Create a Job

Sign in with project-regular, enter into one project (e.g. demo-namespace), then select Workload → Jobs.

Create a Job

Step 1: Fill in the Basic Information

1.1. Click Create Job button, then fill in the basic information in the pop-up window. There are two ways to create a Job, i.e. fill in the creation table and edit mode. The following mainly introduces each step within creation table. If you prefer edit mode, you can click on the edit mode, it supports the yaml and json formats. Edit mode makes it easy for users who are used to command operations.


1.2. On the basic information page, enter the name of the Job, you can also fill in the description as required.

  • Name: A concise and clear name for this Job, which is convenient for users to browse and search.
  • Alias: Helps you better distinguish resources and supports Chinese.
  • Description: A brief introduction to this Job.

Click Next when you're done.

basic information

Step 2: Job Settings

Job has specified 4 kind of settings to handling pod lifecycle.

  • BackoffLimit: Specify the number of retries before considering a Job as failed.
  • Completions: Specify the desired number of successfully finished pods the job should be run with.
  • Parallelism: Specify the maximum desired number of pods the job should run at any given time.
  • Active Deadline Seconds: Apply to the duration of the job, no matter how many Pods are created. Once a Job reaches activeDeadlineSeconds, all of its Pods are terminated and the Job status will become type: Failed with reason: DeadlineExceeded.

Job Settings

Click Next to skip to the next step.

Step 3: Pod Template

3.1. RestartPolicy can only specify Never or OnFailure, when the job is not completed:

  • If RestartPolicy specifies Never, the job creates a new Pod when the Pod fails, and the failed Pod does not disappear.
  • If RestartPolicy specifies OnFailure, the job will internally restart the container when the Pod fails, instead of creating a new Pod.

Pod Template

3.2. Click on the Add Container button, add a container image as needed. The image defined in the template is pulling from the DockerHub by default. Enter the name of the container and the corresponding image name. The image name generally needs to be specified with its tag, such as perl:5.24.4.

In order to realize the effective scheduling and allocation of resources in the cluster and improve resources utilization, the platform uses requests and limits to allocate resources. Request is usually the minimum resource requirement used by the container, and limit is usually the maximum value of the resource. Setting it to 0 means that there is no restriction on the resources used. Request can ensure that the pod has enough resources to run, and limit is to prevent a Pod from using resources unrestricted,causing other Pods to crash.

Table 1: CPU Quota Description

Parameter Description
Requests A request is the amount of that CPU resources that the system will guarantee for the container, and Kubernetes will use this value to decide on which node to place the pod.
Limits A limit is the maximum amount of CPU resources that Kubernetes will allow the container to use.

Table 2: Memory Quota Description

Parameter Description
Requests A request is the amount of that memory resources that the system will guarantee for the container, and Kubernetes will use this value to decide on which node to place the pod.
Limits A limit is the maximum amount of memory resources that Kubernetes will allow the container to use. If the memory usage exceeds this limit, the container may be killed.

Pod template 1

2.2. If the user has further requirements, click on the Advanced Options button.

  • Command: In some cases, you need your command to run in a shell, see Kubernetes documentation.
  • Arguments: You can defined the arguments directly by providing strings, see Kubernetes documentation.
  • Ports: This is the container port that needs to be exposed. The port protocol can be TCP and UDP.
  • Environment Variables: you can define an argument for a Pod using any of the techniques available for defining environment variables, including ConfigMaps and Secrets, which has the same effect as the "ENV" in the Dockerfile, providing great flexibility for creating workloads.

    • Reference Configuration Center: Supports adding Secret and ConfigMap as environment variables to save configuration data in the form of key-value pairs. See ConfigMaps and Secrets.
  • Image Pull Policy: imagePullPolicy, the default image pull policy is IfNotPresent, the kubelet will no longer pull the image if the image already exists. If you need to pull the image frequently, set the pull policy to Always. If the container property imagePullPolicy is set to IfNotPresent or Never, the local image will be used first.

Click Save when setup is complete.

Pod template advanced option

Then Click Next when you're done.

Step 4: Volume Settings

Job suppots totally 3 kind of volumes, i.e. Persistent Storage Volume, Temporary Storage Volume (EmptyDir) and Reference Configuration Center.

Persistent Volume

Persistent storage volumes can be used to save user's persist data, Add Existing Volume means you need to create volumes in advance, see Create Persistent Storage Volume.

Temporary Volume (EmptyDir)

The temporary storage volume represents emptyDir, which is first created when a Pod is assigned to a Node, and exists as long as that Pod is running on that node. When a Pod is removed from a node for any reason, the data in the emptyDir is deleted forever.

Reference Configuration Center

It also supports for configuring the key-value pairs ​​in ConfigMap or Secret via reference configuration center.

A secret volume is used to pass sensitive information, such as passwords, to Pods. Secret volumes are backed by tmpfs (a RAM-backed filesystem) so they are never written to non-volatile storage.

ConfigMap is used to store configuration data in the form of key-value pairs. The configMap resource provides a way to inject configuration data into Pods. The data stored in a ConfigMap object can be referenced in a volume of type configMap and then consumed by containerized applications running in a Pod.

  • Set the value of the environment variable
  • Set command parameters in the container
  • Create a config file in the volume

Note: You need to create a Secret or ConfigMap in the Configuration Center before you can use it, see Create Secret and Create ConfigMap.

Click on the Next button when you're done.

Volume Settings

Step 5: Label Settings

Labels are key/value pairs that are attached to objects, such as pods. Labels are intended to be used to specify identifying attributes of objects that are meaningful and relevant to users. Labels can be used to organize and to select subsets of objects, each object can have a set of key/value labels defined, such as relase: stable ; tier: job.

Label Settings

Click on the Next button when you're done.

Step 6: Node Selector

For the pod to be eligible to run on a node, the node must have each of the indicated key-value pairs as labels (it can have additional labels as well). The user can specify the node on which the Pod is expected to run by setting one or more sets of key-value pairs or select node directly. When not specified, the Pod will likely be scheduled to any node in the cluster that meets the resource scheduling criteria.

Node Selector

Click Create to complete the creation of the Job. The status display “Updating” is due to it's pulling the image. After the image pull succeeds, the status will display “Running”.